Skip to Content

ENOC AutoPro | HomePage

We care about cars and the people who drive them

AutoPro Additives

VISCOSITY STABILIZER
View details

Improves the viscosity of engine oil.

Helps to seal up mobile motor parts especially for older engines:
● Reduces engine wear and depreciation
● Reduces oil consumption due to shear loss
● Reduces engine noise and vibration

 

In extremely heavy conditions the additive will protect the oil quality and prevent the thinning of motor oil and stabilizes the oil pressure.

USAGE FREQUENCY
Add directly to motor oil at anytime.

 

 

 

TREAT RATE
250 ml is sufficient for 6 Liters of engine oil.

 

TAKE NOTE
Fully compatible  with all usual mineral  and synthetic motor oils. Recommended for all gasoline and diesel engines.

ENGINE FLUSH
View details

Extends engine life, the engine oil runs cooler, the oil lasts longer

Helps engine to develop again a better performance:

● Reduces exhaust emissions

● Eliminates black sludge

● Engine runs with less wear

● Reduces fuel consumption


 

Cleans and flushes the engine compartment with concentrated cleaning additives, dissolves impurities such as black sludge and carbon deposits. After the treatment, the new oil can develop its full capacity. The engine runs with less friction therefore the performance is visibly improved.


USAGE FREQUENCY
Add the content to motor oil just before the oil change. Run the engine for about 15 minutes at low rpm.Drain the oil, change the oil filter and add fresh motor oil.

 

TREAT RATE
250 ml is sufficient for 6 Liters of motor oil.


TAKE NOTE
Mixable with all standard petrol and diesel motor oils.

 
CERAMIC TREATMENT
View details

Complete Engine Protection

Helps to extend the service life of the engine:
● Decreases engine wear by up to 25%
● Improves performance by up to 15%
● Reduces fuel consumption
● Reduces Engine Noise

Contains ceramic material that has emerged from the development of space industry. Adding to the oil, the ceramic material will stick on the metal surfaces of the critical parts in the engine. Decreases oil and fuel consumption, reduces wear and friction for all moving parts in the engine, complete engine protection.

USAGE FREQUENCY
Can be used anytime

 

TREAT RATE
Add content to warm engine oil


TAKE NOTE
Suitable for all standard motor oils

 
FUEL INJECTION CLEANER
View details

Cleans the whole injection system and guarantees peak engine performance.

Helps to eliminate starting problems and rough idling as well as poor throttle response:   

● Improves engine start
● Prevents deposits in the fuel system
● Reduces fuel consumption
● Consistent combustion process

Improves the performance and power of the engine
while it cleans the fuel system from the tank to the injection nozzles and prevents deposits. Giving your engine a smoother and more dependable response.

USAGE FREQUENCY
Add every 1,500 km

 

TREAT RATE
Add full content into the fuel tank before filling with gasoline. 250 ml is sufficient for up to 70 Liters of petrol

TAKE NOTE
Compatible for all petrol engine

 
VISCOSITY STABILIZER

Improves the viscosity of engine oil.

Helps to seal up mobile motor parts especially for older engines:
● Reduces engine wear and depreciation
● Reduces oil consumption due to shear loss
● Reduces engine noise and vibration

 

In extremely heavy conditions the additive will protect the oil quality and prevent the thinning of motor oil and stabilizes the oil pressure.

USAGE FREQUENCY
Add directly to motor oil at anytime.

 

 

 

TREAT RATE
250 ml is sufficient for 6 Liters of engine oil.

 

TAKE NOTE
Fully compatible  with all usual mineral  and synthetic motor oils. Recommended for all gasoline and diesel engines.

ENGINE FLUSH

Extends engine life, the engine oil runs cooler, the oil lasts longer

Helps engine to develop again a better performance:

● Reduces exhaust emissions

● Eliminates black sludge

● Engine runs with less wear

● Reduces fuel consumption


 

Cleans and flushes the engine compartment with concentrated cleaning additives, dissolves impurities such as black sludge and carbon deposits. After the treatment, the new oil can develop its full capacity. The engine runs with less friction therefore the performance is visibly improved.


USAGE FREQUENCY
Add the content to motor oil just before the oil change. Run the engine for about 15 minutes at low rpm.Drain the oil, change the oil filter and add fresh motor oil.

 

TREAT RATE
250 ml is sufficient for 6 Liters of motor oil.


TAKE NOTE
Mixable with all standard petrol and diesel motor oils.

 
CERAMIC TREATMENT

Complete Engine Protection

Helps to extend the service life of the engine:
● Decreases engine wear by up to 25%
● Improves performance by up to 15%
● Reduces fuel consumption
● Reduces Engine Noise

Contains ceramic material that has emerged from the development of space industry. Adding to the oil, the ceramic material will stick on the metal surfaces of the critical parts in the engine. Decreases oil and fuel consumption, reduces wear and friction for all moving parts in the engine, complete engine protection.

USAGE FREQUENCY
Can be used anytime

 

TREAT RATE
Add content to warm engine oil


TAKE NOTE
Suitable for all standard motor oils

 
FUEL INJECTION CLEANER

Cleans the whole injection system and guarantees peak engine performance.

Helps to eliminate starting problems and rough idling as well as poor throttle response:   

● Improves engine start
● Prevents deposits in the fuel system
● Reduces fuel consumption
● Consistent combustion process

Improves the performance and power of the engine
while it cleans the fuel system from the tank to the injection nozzles and prevents deposits. Giving your engine a smoother and more dependable response.

USAGE FREQUENCY
Add every 1,500 km

 

TREAT RATE
Add full content into the fuel tank before filling with gasoline. 250 ml is sufficient for up to 70 Liters of petrol

TAKE NOTE
Compatible for all petrol engine